Stock # O-4199

Alien 100 Pad Printer

New: 2002

Model 100

9 Station Turret rotary  table

Prints on round or flat  material

Stock # O-4198

Alien 100 Pad Printer Model 100

Single Station Turret

S/N: Can0905    New: 2004

110 power

foot pedal

Stock #O-2494

BARBER-COLMAN GEAR HOBBER

MODEL# 14-15

S/N 1425       NEW: 1975

** VERY GOOD CONDITION **

SPECIFICATIONS:

Max. Rated Work Diameter               14"

Max. Hob Diameter                      5 1/2"

Max. Pitch                             3 1/2 DP

Max. Work Face                         14"

Max. Travel of Hob Slide               15"

Machine Electrics                      460/3/60 Cycle

Machine Weight                         11,000 lbs.

EQUIPPED WITH:

* Double Thread Worm                    

* Auto Hob Shift

* Hydraulic Tailstock                  

* Hydraulic Part Clamping

* 1 Hob Arbor                          

* 1 Set-up of Change Gears

* Outside Hydraulics                   

* Work Spindle Bore 4-1/8"

* Differential                          

* Manuals

Stock # O-4196

Binks Paint Booth

Model: SCS-4/6/1/E-2

S/N: 035469404

Electric, Max Temp 200

input: 36km

VOLTS- 480/3/60

53 AMPS

Sam System Analizing Monitor  Control

Paints 7" Square piece

Stock No. O-4158

used Blanchard 18 Rotary Surface Grinder

         S/N 3280                 Model year: 1950’s

Specifications:

Chuck Size                               36” Diameter

Swing                                       36”

Under Wheel                           18”

Grinding Wheel Width             1”

Grinding Wheel Diameter        18”

Vertical Capacity    12” with new cylindrical wheel

                              11” with new cylindrical wheel

Work Load Weight                   3,000 Maximum

6 Chuck Speeds                 6,9,12,18,25,33 RPM

Wheel Speed                            720 RPM

Power Down Feed                   .004”- .008”

Equipped with

Neutrol & Electromatic Rectifier

Coolant System with Splash Guards

25 HP, 220/440/60/3 Motor & Controls

Floor Space  9’ 3” X  4’ 11” X 7’ 7”

Weight 11,400 LBS

Stock #O-4302

1.625" BROWN & SHARPE

ULTRAMATIC 2B

SINGLE SPINDLE

AUTOMATIC SCREW MACHINE

s/n: 2542-2-6918    New: Mid ‘70’s

Specification:

Spindle Capacity……………………………1-5/8"

Maximum Turning Length……………….3.5"

Maximum Length of Feed Stroke……….4"

Turret Tool Holder Bore………………………1"

Turret Index Time……………………… .75 Sec

Movement of Cross Slide……………….1.75"

Spindle Speeds………………..17-2906 RPM

Driveshaft Speed……………………80 RPM

Stock #O-3315

    BROWN & SHARP 1236 HI-TECH

    CNC CREEP FEED SURF GRINDER

              S/N 523-6236-1014  Year 1990

General Specifications

CAPACITIES:

Max.work width x length 12 " x 36"

Max. height under 20"dia. wheel 15.25"

Wheel size standard 20" x 5" x 8" I.D. SPINDLE:  Type: Variable speed

Horsepower standard 60 HP @ 1250 RPM  (40-1800 RPM) 

DIAMOND ROLL: 

Type: Over the wheel

Roll size 4"-6" Dia.(52mm I.D.) 

RPM -4500 to +4500 RPM 

TABLE (X-Axis): Max. table travel 40"

Table drive Ball screw

Range of speeds 0.4-960 I.P.M.

CROSS FEED (Z-Axis): Max. cross travel 11" Continuous cross feed rate 0-225 I.P.M.  Incremental feed rate 0.00004"-0.5"

Resolution with A-B 8200 0.000010"

Position speed 225 I.P.M.

VERTICAL FEED (Y-Axis):

Max. Vertical travel 19.25"

Rapid travel rate 40 I.P.M.

Minimum incremental feed 0.000020"

Resolution with A-B 8200 0.000010"

Motor Specifications 60 HP Grinding wheel motor

Equipped With Allen Bradley 8200 CNC controls 60 HP Grinding wheel motor 

6 1/2" Wide wheel

Stock No. O-3413

used BROWN & SHARP TECHMASTER

        Surface Grinder

        S/N 523-l8l8-l627

Catalog Specifications:

Electro magnetic chuck                                               8” x l8”

Max. height over chuck (under 7” wheel) approx.             19”     

Max. long. table travel                                                      22”

Maximum cross travel                                                      9.5”

Maximum vertical travel of wheelhead                              20”

Hole grinding wheel                           8” o.d. x l” wide x 1-l/4”

Table speed longitudinal, vari rate                    5 to 100 FPM

Table cross feed incremental rate at each reversal      .0l0” to .50”

Cross truing rate                                                      0-20 IPM

Cross travel travel rate                                               75 IPM

Vertical powered rapid positioning of wheel head       32 IPM

Equipped with:

“Cycle size” - Auto Cycle System

Power Down Feed

Trabon Modu-Lube Auto Lube System

O.S. Walker Electro-Magnetic Chuck

Nuetrofier Rectifier

Auto Cross Feed Reversal

Coolant System

3 HP l800 RPM Spindle/230/460/3/60

Cincinnati 1008 Mechanical Shear    8' x 10 Gauge
Date of Mfg: 1963
Serial Number: 32724
Capacity Mild Steel ….................................. 10 Ga.
Shearing Length .................................................. 8'
Distance Between Housings ........................... 8' 3"
Motor ............................................................. 5 HP
Speed ......................................................... 65 spm
Holddowns ........................................................... 9
Distance Under Holddowns …………............... 1/4"
Holddown Force .......................................... 5 Tons
Length of Knives .............................................. 8'6"

 

Stock No. O-l544

used CINCINNATI MILACRON  12”x48”

         Universal Grinder  S/N 3532E-77003

   With swing down internal Grinding Attachment

   New:  1977

Specifications

Swing over table:  l2-l5/l6”

Distance between centers:  48”

Maximum grinding wheel:  l4” x l-l/2” x 5”

Grinding Wheel head swivel:  + 90 deg. lower

                                             1/- deg. upper

Table swivel:  +9 - 2 degrees

Automatic cross feed:  -.0002” - .005” dia.

Min unfeed increments:  .00005” dia. reduce

Table traverse speed:  3 - 220 IPM
Headstock rotation speeds:  50 - 500 RPM

Headstock swivel:  0-5 seconds

Wheel head

Internal motor

Workhead motor

Equipped with

Pickfeed

Rapid infeed

Drop down ID spindle (read head)

Live and dead workhead

Inch/metric graduations

Coolant system

(1) Steady rest

(2) Work rest

(2) Wheel mounts

Balancing arbor

Table dresser

Stock # O-4033

      Colonial Broach Model RD2048

                “C” Frame Type

                 s/n:53K32-0540       Rebuilt in 1991 

3 Position

20 Ton

48” Stroke

Stock # O-4034

Detroit Broach
Dual Power Pull Down Type
 s/n:785068       Rebuilt in 2001

2 Position

40 Ton

48” Stroke

Stock No O-3444

3H48 Devlieg Jig Mill
Serial No.: 8142
 Age 1974
 Model: 3H48 Spiramatic

SPECIFICATIONS

Spindle Diameter .................................... 3"
Spindle Taper ….................................... #40 

Vertical Travel ....................................... 36"
Cross Travel ...........................................48"
Platten Travel .......................................... 9"

Spindle Travel ....................................... 16"
Spindle Speeds …................ 25-1200 RPM
Bar Feeds ................................ .002" -.024" 

Table Size  ................................... 35" X 48"
Rapid Traverse ………................... 95"/min

Main Motor ....................................... 7.5 HP
 Equipped With:
 Automatic Depth Control
 Automatic Bar Cycle
 Power Tool-Locking
 Table Retraction
 Steel Way Covers
Sony Scales

Stock No. O-3321 used EDM Solutions Columbia S/N 8014 New: l996
Specifications:
Travels: “X” axis l6”
“Y” axis l4”
“Z” axis 10”
Ram T-Slotted Fixutre Plate: 8” x l0”
T-Slotted Table: l6” x 30”
Equipped with 300 AMP Power Supply w/programmable Z-Axis Control Mitutoyo Scales

Stock # O-3938

                 Emco, Model HWC-15

                W/Fanuc OM control

                 S/N: R04012963      New:1996

Table Size………………………………….29 x 24

X Axis………………………………………………..24

Y Axis…………………………………………………21

Z Axis…………………………………………………18

Hole Diameter……………………………… 51mm

Spindle…………………………………. 6000 RPM

3 Axis Table

6 position tool Magizine

15HP

 

<fam>

Stock #O-3961

FMB TURBO 4000/1700 LMS

MAGAZINE TYPE BAR FEED

 s/n: 2-200712 NEW 1988

SPECIFICATIONS:

BAR STOCK CAPACITY:                   1" - 2 1/4"

MAX. BAR DIAMETER CAPACITY:    25 MM-65 MM

MAGAZINE CAPACITY:    300 MM. OR (12) 1" BAR

MAX. BAR LENGTH CAPACITY:        14.6'

MAX. SPINDLE HEIGHT:                  41.3"

OPERATING VOLTAGE:                    380 VOLT

APPROXIMATE OVERALL DIM.:   18' x 3' x 5'2"

WEIGHT:                                         2860

<fam>

Stock No O-4205

G&L 80DPS-T.
New 1976,
s/n 150-1470 
440 3 phase,
Numeriset 6
3 axis readout w/memory point to point control put on in 1986.
Cross, vertical & saddle travels are 84",
spindle travel is 36",
5" spindle diameter,
spindle speeds 7.5 - 975 rpm.
Saddle supports,
30 hp spindle drive,
power draw bar.
There are a pair of large angle plates 
Lucas manual 48" indexing table.
Some assorted tooling

Stock #O-4374

6" X 27" HEY MODEL #3

FACING & CENTERING MACHINE

S/N: 2824-777          NEW 1977

GENERAL SPECIFICATIONS:

Maximum diameter of work in vise 6 1/2"

Maximum work length 27"

Maximum swing over bed 21"

Spindle speeds (18) 67-1430 RPM

Feed rates (8) .0015 - .022 IPR

Rapid traverse rate 250 IPM

MOTOR SPECIFICATIONS:

(2) 10 HP Spindle drive motors

EQUIPPED WITH:

(2) Self centuring pneumatic vises

Automatic cycle controls

Coolant system

(2) 10 HP Spindle drive motors

Feed box

(2) air operated vises

Automatic cycle controls

Call us for specs

Stock # O-4108

   Used IEMCA VIP 70 Magazine Bar Feed

Specifications:

Bar Diameter (round)………3/16” to 2 3/4”

Bar Diameter (hex)…..…3/16” to 2 11/64”

Loading Center Height……….. 34” to 50.5”

Minimum Bar Length………………………… 10”

Maximum Bar Length……………………….. 50”

Max. Weight of Bar to be loaded…. 100 lbs.

Max. Magazine Load…………………... 400 lbs.

Electrics………………………………………. 230/3/60

Bar Feeder Weight…………………….. 1000 lbs.

Stock # O-1445 

Universal Tool & Cutter

Grinding Machine

Model MG-2

Specifications:

Height 57”

Depth 20.8”

Width 30.7”

Weight 507 lbs

Spindle 4500 rpm

Grinder Wheel O.D. X I.D. 4” X 1-1/4”

Collet Chucks ER-40 Range 1/8” – 1-1/2” and Bridgeport type

Attachments For:

Form Cutters and end mills (OCU)

Regrinding spiral end mills (OEM)

Lathe tools (OLT)

Regrinding twist drills (ODR)

Flanges for additional types of grinding wheels and tool support for  ranges 3-20mm & 20-40mm

John Bean JBC Self Calibrating
Wheel Balancer #4100
S/N: E4 1 GS 019

Specifications:
Accuracy: To 0.10 oz. (2.8gm)
Digital Readout: ounces or grams
Spin: Automatic or manual
9 BALANCING MODES
Static or dynamic balance
6 weight placement (Alum) modes
Match Balancing
- Single spin balance
- Enclosed wheel guard with safety interlock
- Shaft Rotation Speed: 200 rpm
- 14 revolutions for measurement
- Microprocessor controlled
- Operator self-calibration
- Touch pad keyboard
- Self-diagnostic capabilities
- Digital display round off to .25 oz.
5gms, non round-off to .05 oz. (1gm)
- 1/2 H.P. Induction motor
- Shaft size: 1 9/16" diameter (40mm)
- Parameter memory up to 4 jobs simultaneously
- 20 weight pockets
- Weight angle resolution: 1.4°
- Digital display panel
Rim Width: 3-19" (76mm483mm)
Rim Diameter: 3-24" (202mm10mm)
Tire Diameter: up to 40" (1016mm)
Tire Wt: up to 120lbs. (54kg)
Footprint: 97"x 60” (2464mm x 1524mm)
Shipping Weight: 380 lbs. (173kg)
Shipping Volume: 38.8 cu.ft. (1.1m3)
Power: 115volt 1 ph, 60 cycle
Comes with the user Manual

Stock #O-4354

6" x 12", K.O. Lee

Surface Grinder, No. S714

S/n: 22377  New: 1980

SPECIFICATIONS:

Manual Feed

Table Work Surface, Approximately 6"x13"

Motor, 1 HP 3450 RPM 230/460/60/3

Grinding Wheel Capacity, 8" Diameter

Table Travel, Longitudinal, 14", Cross, 7 1/8"

Work Height, Top of Table to C/L of Spindle,

Minimum 3 5/8", Maximum, 16"

Handwheel Graduation, Vertical, .0001",

Cross, .001

Grinding Wheel, 8" x 3/4" x 1 1/4"

Spindle Speed, 2850 RPM

Net Weight, 970 Lbs

Stock No. O-2556

used KGN Manufacturing Screw Machine

         Model KGN-0l4

         S/N 185

Specifications:

Model number KGN-0l4 with l-l/4” Capacity

CNC Conversion of l-l/4” Brown & Sharpe Base

GE Fanuc Series OT CNC Control

6-Position Turret

(2) vertical slides

(2) side forming slides

l8’ pneumatic Econodyne Bar Feeder

Electrics:

230V3/60 HZ

Used LNS Mini Sprint S2  Magazine Bar Loader

S/N: 9646923   Year: 1996

BARSTOCK CAPACITY: 3mm TO 20mm , centerline side loading magazine, 300mm wide

MAX. BAR LENGTH CAPACITY: 3.66M
STOCK MAGAZINE (APPROX): 685" WIDE

EQUIPPED WITH:

CONSTANT SURFACE SPEED CUTTING

PATENTED HYDROSTAIC BEARING REMNANT RETRACTION

GRAVITY RACK FEED - 305 LINEAR mm
20MM BEARING SET W/18MM PUSHER

Stock No O-3727

Used LNS Super Hydrobar HYS 6.65

              S/N 28817         

Specification:

Consists of (6) guide tubes with internal diameters of:        

2.480" for 2 - 1/8" to 2 - 3/8" diameter barstock  

2.244" for 1 - 7/8" to 2 - 1/8" diameter barstock  

2.047" for 1 - 5/8" to 1 - 7/8" diameter barstock  

1.732" for 1 - 3/8" to 1 - 5/8" diameter barstock  

1.457" for 1" to 1 - 3/8" diameter barstock           

1.063" for 3/4" to 1" diameter barstock 

 Equipped With:

Stands and hydraulics

Capacity 3000 LBs

50" MAAG MODEL SH 100Z
RACK TYPE GEAR SHAPER
NEW: 1975

GENERAL SPECIFICATIONS:
Max. length of rack (in one set-up) 1,250mm
Modul range 2 - 15
Width of tooth 0 deg. straight 250mm
30 deg. Inclined 210mm
Max. length of tool stroke 30 - 325mm
Number of strokes 6 - 125/min.
Table size 400 x 1,300mm
Max. weight of work piece 800 kg
Main drive, approx. 8.5 kW
Total electrical load, approx. 12 kW - 380V -50Hz
Weight, approx.  8 Tons
EQUIPPED WITH:
Approx. 40 change gears
Clamping device for racks up to 1.000mm
Lateral table supports for heavier cuts
Supports
Adjusting the blank lengthwise can increase work piece length
Coolant tank


 

Stock # O-4521

Mitutayo Surftest SV-400

S/N: 790102

The Surftest SV-400 is a surface-texture measuring instrument
with enhanced portability and ease of operation to
ensure surface roughness measurement on the shop floor.

Features:

The SV-400 has an advantage of data reproducibility in a
repeated measurement due to the use of scale sampling
(The correct reset to the measurement start position
is guaranteed in the auto-return/return mode.)

Five Kinds of measurement conditions can be
registered in the internal memory and recalled from
it as needed. In addition, the optimal RAM card provides
a means of writing and reading measured
data and measurement conditions.

The real profile function permits real-time
recording of assessed profile graphs.

It is a portable and compact instrument
that is suited for shop floor use.

The optional parameters can easily be added or
changed by replacing the ROM board.

Digital output is provided as standard and
can be sent to a personal computer.

The SV-400 is compatible with Mitutoyo Statistical
Process Control systems. It is provided with
an SPC output connector.

Stock # O-4404           

MOTOMAN-SK16X

w/Yasnac XRC Control

New: 1999

Specifications

Controlled axes …………..6

Payload …………………..16 kg

Repetitive positioning accuracy. ±0.08 mm

S-axis (turning)………………………. ±170°

L-axis (lower arm)……………....… +150°, -90°

Motion U-axis (upper arm)  …...+150°, -125°

range R-axis (wrist roll) …..… …±180°

B-axis (wrist pitch)…………….. … ±135°

T-axis (wrist twist)………..…… … ±350°

S-axis……………………………..………. 140°/s

L-axis ………………………………..…….140°/s

Maximum U-axis …..……..…………140°/s

speed R-axis…………………..……... 330°/s

B-axis……………………………..………. 330°/s

T-axis …………………………….…………480°/s

Weight ………………………….….……..280 kg

Power supply ……………….……….…3 kVA

Allowable moment                  R-axis 31.4 Nm (3.2 kgf•m)

                                            B-axis 31.4 Nm (3.2 kgf•m)

                                            T-axis 15.7 Nm (1.6 kgf•m)

Allowable inertia GD²/4           R-axis 0.7 kg•m²

                                             B-axis 0.7 kg•m²

                                            T-axis 0.2 kg•m²

Ambient conditions                 Temperature 0 to 45°C

                                            Rel. humidity 20 to 80% RH

                                            Vibration  0.5G or less

Others  IP54 (wrist unit)

            Free from corrosive gas or liquid, or  explosive gas.

            Free from excessive electrical noise.

 <fam>

Stock No. 0-2404

Myford Model MG12

Universal Grinder

New: 1965

Serial No. S-64234

Specifications:

Maximum grinding diameter            3”

Swing over table                               5”

Maximum table travel                       13.5”

Capacity between centers              12”

Table swivels                                     +7 degrees

Grinding wheel size                  12”x1 1/2” Wx5”holes

Wheel speed-2 belt system            2200-2500 RPM

Workhead speeds                      75-780RPM, variable

Power                                            3 HP

Workhead Motor                           1/2 HP

Max. collet capacity                          3/4”

Equipped with:

Plain workhead

Coolant system

Tailstock

2 Dressers - 1plain, 1 radius

2 point steady rest

Swing down high speed internal grinding spindle

Many wheels and spare parts

Dimensions:  FB x RL - 40”x57”

Height:          70”

Est. weight:   2200#

Romi Bridgeport 16- 8 Engine Lathe
w/ Newall Digital Readout
16” X 80
s/n: 027477-140   New: 1990’s

Featuring
Maximum swing over bed                        16"
Maximum swing over carriage             9-5/8"
Distance between Centers -                    80"
Spindle bore -                                     2.25"
Spindle Speeds (12)             22.4-1800 RPM
Longitudinal feeds (99)      0.0012-7.145 IPR
Cross feeds (99)                0.0006-3,584 IPR
Tailstock Spindle Taper                      MT #4
Tailstock Spindle Travel                      6-5/8"
Main Motor                                       7.5 HP
Approximate Machine Weight          4500 Lbs.
Approximate Machine Dimensions - 137"L x 36"W x 48"H
Equipped with:
3 Jaw Chuck, 8.5"
4 Jaw Chuck  12”
Steady Rest
Quick Turn Tool Post
Thread Dial Indicator
Live Center for Tailstock
Coolant System
Induction Hardened & Ground Bed Ways

39” SCHIESS MDL. KE100 VERTICAL BORING MILL
       S/N  N/A                               YEAR: 1976

 Max. turning diam./table diameter                           39”
 Max. turning diam. with side head down                  45”
 Max. turning height over table                                  43”
 Max. vertical tool travel for rail head                        27-1/2”
 Max. distance table to cross-rail turret                     52”
 Max. horizontal tool travel for side head                  21-1/2”
 Max. distance table to bottom of side head 
   turret                                                                     29-1/2”
 Vertical travel of cross-rail                                       29-1/2”
 Max. load on table                                                   3 Tons
 No. of table speeds                                                 16
 RPM of table                                                           6.2-310
 No. of horizontal, vertical, & angular feeds, ea        12
 Feeds per table revolution                               .0023”-.262”
 Rapid traverse of heads per minute                         89”
 Travel of cross-rail per minute                                 15- ¾”
 Motor Specifications:
 25HP AC Main drive motor, Reliance electric
 Equipped With:
 Mitsubishi pendant controls in 1999
 Mitsubishi AC spindle drive
 5-position turret head, swiveling
 39” 4 Jaw table with top saws
 Glass scales
 Misc. turret toolholders

 

Sharp Vertical Mill  YC-1 1/2 VA

S/N: 246697      New: 1980

Table Size                                    9" x 42"
Longitudinal Travel                              30"
Cross Travel                                        12"
Vertical Knee Travel                             16"
Spindle Speeds (Variable)   60- 4,200 RPM
Spindle Nose                                     R- 8
Spindle Quill Travel                               5"
Motor                                                2HP

Stock # O-4520

 

Super Tool Part Handling Crane

Model BMM-40P

S/N: 0001NP0149

 

Capacity  100 Kg

Pneumatic

10’

 

Stock # O-4584

Tolhurst 40” Chip Spinner

s/n:T-29739

Equipped with one basket

Basket rpm 700

220/440 volt

5 hp motor

<fam>

Stock # O-4780

Topper Bar Feeder BF-1200

New:

Features of BF1200 bar feeder:

• Easy installation – Factory integrated through Fanuc control
• 1 minute bar diameter changes
• Hex or Square stock (1 position spindle orientation included)
• No special bar straightness requirement
• 0.2"~2.5" diameter bar capacity
• 4 foot bar lengths
• Holds:

• 10 – 2.5" diameter bars or
• 25 – 1" diameter bars

Stock #O-4274      

        Yasnac Motoman SK6 Robot

    With MRC Controller and Teach Pendant

         s/n: S62022-1-1  New: 1996

Specifications:

Structure …. Vertically Articulated

Axes …………………………..……….….. 6

Payload ……………………..………….6 kg

H-Reach ………….…………… 1322 mm

Repeatability ……………….. ±0.1 mm
Robot Mass ………………….……… 80 kg
Robot MotionRange
L-Axis ……………………........….. ±240° 

U-Axis………………...………………. ±270° 

R-Axis…………………………………. ±360° 

B-Axis…………………………………. ±270° 

T-Axis ………………………………… ±400° 

Robot Motion Speed:

S-Axis ….....……  110 °/s - 1.92 rad/s

L-Axis…….....…….. 90 °/s - 1.57 rad/s

U-Axis ……......…. 110 °/s - 1.92 rad/s

R-Axis ………..240 °/s - 4.19 rad/s

B-Axis ………………. 180 °/s - 3.14 rad/s

T-Axis …………….…. 400 °/s - 6.98 rad/s

The Motoman MRC controller features upgraded performance and reliability though a unique 32-bit multi-processor structure. It has the ability to control up to 21 axes. Cooperative and independent control can be accomplished by operating two robot either together or independently. It also allows robot-like external axis teaching. Interpolation control can be performed in cooperation with external axis, resulting in simplified programming. I/O control can be achieved by robot control jobs. Concurrent running with robot control jobs improves activity cycle time.

The MRC teach pendant features a 40 character by 12 line display that is backlit for ease of viewing. All teaching operations can be performed on the pendant. The popular guide method was adopted for operation. The direct open key allows for one touch display of information.

 <fam>