Stock No. O-3534

used Amera-Seiki Model DTM-40

        Serial No. W950l43       New:  l996

Specifications:

Travels “X” Axis                        20”

             “Y” Axis                        l4”

             “Z” Axis                        l8”

Table size                                 l3”x23”

Table load capacity:                 550 lbs.

Spindle taper:                           BT40

Spindle speed rpm:                  60-8000

Spindle motor (Max rating)       l0 HP AC

ATC # of tools:                         10

Tool selection:                          Random

Maximum tool diameter:           3”

Maximum tool length                9.8”

Maximum tool weight:              7.7 lbs.

Tool Change time:                   2.8 sec.

Rapid traverse (x-y):                940 IPM

                               z:              630 IPM

Ball screw size (Y-Y)                l.26”

                               z:               l.4l”

Spindle nose to table               7-l/2” - 25-l/2”

Spindle center to column:        l4-l/2”

Accuracy positioning (full stroke)   + or - .0002”

Accuracy repeatability:                   + or - .0002”

Equipped with:

Mitsubishi CNC Control

Rigid tapping/Full Enclosure: Standard

Dimensions:

Machine width:  6l” depth, 94” height, l07” width
Machine weight:  6600 lbs

Stock # O-4144

 BRIDGEPORT SERIES II VARIABLE SPEED

•                         VERTICAL MILL, 11" X 58"  
                 S/N 1247   

SPECIFICATIONS:
WORKING SURFACE: 11" X 58"
LONGITUDINAL TRAVEL: 30"
CROSS TRAVEL: 15"
VERTICAL KNEE TRAVEL: 16"
RAM TRAVEL: 16"
T-SLOTS #, SIZE: (3) 5/8"
SPDL DRIVE/SPEED: VARIABLE 50 - 3500 RPM
POWER FEED TO QUILL: 0.06 - 2.5 IPM, VARIABLE
QUILL DIAMETER: 4.25"
THROAT DISTANCE MIN.: 10-5/8"
THROAT DISTANCE MAX.: 26-5/8"
SPINDLE TAPER: # 40
QUILL TRAVEL: 5"
ELECTRICS: 220/440 VOLTS, 60 CYCLES
3 PHASE, 4 HP
DIMENSIONS: 7' X 10' FLOOR AREA
HEIGHT: 93"
WEIGHT: 5,200 LBS
EQUIPPED WITH:
Crusader ll Programmable Control

POWER FEED TABLE, MOTORS, CONTROL

Stock No. O-3992

     Brother TC-221 Tapping Center

         Serial No. 111607             New: 1996

Specifications:

Table size                                       23.62”x11.81”

Max. table load                               150kg 330lbs

Travels                                            (x)      16.53”

                                                       (y)     11.81”

                                                       (z)     9.84”

Spindle speed                                    6-6000 rpm

Max. spindle speed in tapping           5000 rpm

Spindle taper                                     BT30

Feedrate (x,y)                36000mm/min 1417ipm

Feedrate (z)                   30000mm/min 1181ipm

Cutting feedrate            5-10000mm/min 393ipm

ATC                                                    10 tools

Tool to tool                                                  1.2 sec.

Chip to chip                                         2.3 sec.

Spindle motor                4.3kw/3.7 kw 5.9/4.9hp

Machine weight                                   1800kg

Machine dimensions 1560x2630mm x 2430mm(h)

Equipped with:

Brothers CNC control

Dryflow Filtration system

7 tools

Manuals

Stock # O-4877

Brother CNC Drilling & Tap Center
TC-323 with rotating Pallet “Quick Table”
Brother CNC 630 Control (conversational)

S/N:111132    New:  l996

Specifications:
Table Dimension:  33.1” X 19.7”           
Table Work Area size
(2 Surfaces) 19.7” X 11.8” 
Travel  X 16.5”, Y 12.6”, Z  10.2”
RPM   10-10,000
30 Taper
10 Position Turret
1.2 sec Tool to Tool
2.3 sec Chip to Chip
1181 IPM Rapids
7.5-17.7” Table top to Spindle Nose
Chip Conveyor
Machine weight   6,200 (approx.)

Stock O-3584 

 BURGMASTER MODEL VTC-200 3-AXIS VMC

Year 1985                            s/n 235038

GENERAL SPECIFICATIONS:
Axis travel:
X 90"
Y 15"
Z 20"
Table:
Work surface 16" x 90"
Load capacity 1,000 LBS
Spindle speeds (infinitely variable) 20 - 10,000 RPM
Spindle motor 7.5 HP AC Continuous
Feed rates:
X & Y Axes 400 IPM
Z Axis 600 IPM
Accuracies:
Positioning X & Y +/- .0005"
Position Z +/- .001"
Repeatability X & Y +/- .0003"
Repeatability Z +/- .0005"
Tool changer:
Tool storage capacity 40 Tools
Tool holder 40 Cat V-Flange
Maxiumum tool diameter 5" Adjacent pocket vacant
  4" Adjacent pocket
occupied
Maximum tool weight 20 LBS
Maximum tool length 11-3/4"
Tool change time (sequential) 5 Seconds
Machine weight 14,000 LBS

MOTOR SPECIFICATIONS:
Wired 460 Volt

EQUIPPED WITH:
Fanuc 6MB CNC control
40 Position automatic tool changer
Telescoping way covers
Splash guards
Coolant system

Stock No. O-3544

used CINCINNATI Arrow 500

         Vertical Machining Center

        with FNC 3500 Control

        Serial No. 7042-c00-94-0176   New: l994

Specifications:

“X” Axis Travel:                                           20”

“Y” Axis Travel:                                           20”

“Z” Axis Travel:                                           20”

Table size:                                    27.5”x 20.5”

Table load capacity:                            770 lbs.

Rapid traverse rates:                          590 IPM

Tool capacity:                                              21

Tool change configuration:               Carousel

Spindle taper:                                        CT 40

Spindle drive motor:                         l0 HP AC

Spindle speeds:          Direct Drive  Variable Speed

No. of spindle speeds:               60-6000 RPM

Spindle chiller                                           Yes

Rigid tap:                                                  Yes

Full chip enclosures:                                Yes

Way Construction:                                 Linear

Weight:                                              8150 lbs.

Dimensions:                           106” x ll8” x l06”

Depo MCFV125EZP39.03
Vertical Machining Center
w/Heidenhain TNC426 CNC Control
S/N 220260-0162  New: 1997        

Travels:         
X - 40.1”
Y - 23.6”  
Z - 25 Z”
Spindle Taper Cat #50
Motor  15 HP
ATC     2 x 21
Equipped With:
Boxed Ways
Chip Conveyor
Coolant tank w/pump
Chiller

 O-3646
 

1994 FIRST MCV-641 with FANUC OM-C Control

Specifications

    Table size 35"x16"

    Max. travel x-24",y-16", z-20"

    Spindle speed 180 - 6000 rpm.

    BT-40 Taper

    Table load cap.500kg (1,100lbs)

    7.5 - HP MotorT

    Tool changer 18 station 

Stock # O-4632

Enshu DTCL S300 VMC 
2 Pallet
s/n 466  New: 1995
With Yasnac 180 MB CNC Control

Travels
X            19
Y         15.7”
Z            15”
HP          7.3
RPM   10,000
ATC         16
Taper       30
Equipped with   
180  degree pallet changer
High  speed drill tap
Manual pulse generator
Machine weight   7,700 LBS

Fadal VMC 4020 HT Extended "Z"
w/Fadal 88 CNC Control
S/N 9506071     New:  l995

Specifications:
Table:                               47.94” x 20”
Travels
 “X”                                             40”
“Y”                                             20”
“Z”                                             28”
Main motor:                                15 HP
Spindle speed:                   10,000 RPM
Spindle nose to table:               4” - 32”
Spindle:                                 CATV-40
No. of tools:                                    21
Equipped with:
High Speed CPU
Graphics
4th Axis Pre wire

FADAL VMC4020 HT VMC
Extended “Z” Axis  and  Pallet Changer
          New:  1997         S/N: 9708896

Specifications
Table size:                                48” x 20”
Floor to table surface:                32”
T-slots:  (5)                               0.687” x 3.75”
Cutting feed rate:                        0.0l - 400 IPM
Rapid travel rate:      X/Y 900  IPM    Z  700 IPM
Max. weight on table:                 3,64l pounds
AC Axis drive motor:         3,800 pounds/thrust
Ball scrw size:                      40 mm diameter
Travels:                                         40”x20”x28”
Spindle nose to table:                   4” - 24”
Spindle ctr to column ways:          20”
Main motor:                                 l5 HP/22.5 HP
Spindle speed:                              l0,000 RPM
Spindle taper:                               CAT 40
ATC:                                              30
Machine dimensions:                   ll6”x87”xll4”(h)
Machine weight:                          l0,500 pounds
Equipped with:
AC Drives
Pallet changer System
Extended “Z”  Axis     
32 MP CNC Control
High Speed CPU
Graphics
422 Memory Expansion
Hydro sweep System         
Coolant Through Spindle   
Rigid Tapping
Remote M.P.G.
Coolant Tank
Chip Conveyor
 

Stock #O-4779

Haas VF-1 CNC Geared-Head

Vertical Machining Center

S/N 1100    New: 1990

Specifications:

Travels:                (X)20”  (Y)16” (Z)20”       

Table Size:                            26” x 14”

Spindle Taper                           CAT 40

Spindle Speed:                0 -7,500 RPM

Toolchanger:                           16 ATC

Change time                            5.0 sec

Max tool diameter                         3.5”

Machine Weight:                   7,100 lbs

HP                                                15

Stock no O-4381
One Used HAAS VF-5/50 CNC VMC with side mount tool changer
New 2004 s/n 37882

Specifications:
Table 62” X 23”
Table Load 4000 Lbs
X Axis Travel 50"
Y Axis Travel 26” 2"
Z Axis Travel 25"
RPM 7,500
Taper 50
2 Speed Geared Head
ATC 30
Rapids X 710 IPM
Y & Z 710 IPM
Tool-Tool 4.2 sec
Chip-Chip 6.3 sec
Approximate weight 16,000 LBS

Equipped With:
Side Mount Tool Changer 30 Tool
7,500-rpm 50 taper Spindle,
30-hp Dual Drive (Y-Delta), geared head.
Hard Disc Drive and Ethernet Interface.
Compatible with Windows 95, 98, ME, 2000, and XP.
Expanded Memory to 16 MB
Coordinate Rotation & Scaling
Probe-Ready Option with Macros and power supply
Key switch Memory Lock for front pendant
High Speed Machining with Look Ahead.
Use Definable Macros.
Spindle Orientation.
4th and 5th Axis Drives and Wiring.
Trunion model 210 4th & 5th Axis Table
Cable assembly for M-Code

stock No. O-4242

used HITACHI SEIKI Model VA 40 CNC

         Vertical Machining Center

          With Automatic Pallet Changer

             and Fanuc 6M CNC Control

Serial NO. VA 4619              New:  l984

Specifications

Machine table dimensions:   49.2” x l5.8”

Travels     X  :  28”

                 Y  :  l6”

                 Z  :  l8”

Table load capacity:  ll00 llbs.

Pallet load capacity:  440 lbs.

Spindle taper:  CAT #40

Spindle speed range:  28-4000 RPM
Spindle motor:  7.5 HP

ATC:   25 Tools

Approximate weight:  l0,340 lbs.

Equipped with

Fanuc 6MB CNB Control

Splash Guards

Stock # O-4327

Hitachi Seiko MACCMATIC-48VGb VMC

w/FANUC 6M

s/n: 7128433           New: 1984

STROKE AXIS X      800mm.

STROKE AXIS Y      420mm.

STROKE AXIS Z      480mm.

TABLE SIZE            1100 x 400mm.

SPINDLE  SPEED        rpm.

TOOL SIZE             #40

ATC                        24    

Stock #O-4568 

HITACHI-SEIKI VK65

CNC Vertical Machining Center

w/Pallet Changer

S/N: 65143     New: 1990

SPECIFICATIONS:

TRAVELS:

X-AXIS: 50"

Y-AXIS: 26.4"

Z-AXIS: 26.4"

PALLET SIZE: (2) 39.4" x 24.8"

SPINDLE MOTOR: 20/15 HP AC

SPINDLE SPEEDS: 45-4500 RPM

SPINDLE TAPER: CAT #50

SPINDLE MOTOR: 20/15 HP AC

TOOL CHANGER CAPACITY: 30 ATC

RAPID TRAVERSE RATE: 512 IPM

CUTTING FEEDRATE: 397 IPM

MACHINE WEIGHT: 34,000 LBS

EQUIPPED WITH:

PALLET CHANGER (2)

SEICOS MODEL M MK3 CNC CONTROL

CHIP CONVEYOR

MANUALS

COOLANT

Stock # O-4139

HURCO KM3P 3-AXIS CNC KNEE MILL

New in 1991             S/N KDD-9005091A

Specifications:

Ultimax II Split Screen CNC Control

Table..................................14” x 49”

3 HP Variable Speed with Power Shift from High to Low

Universal Quick Switch 200 Spindle

Travels:

X Axis.................................. 24”

Y Axis...................................14”

Z Axis....................................5”

KITAMURA Spark Changer MYCENTER 0
w/YASNAC MX-3 CNC Control
s/n: 75007  New:1996

SPECIFICATIONS :
Table Size …………………………….12" x 18.1"
Table Load Capacity ……………132 lbs
X Axis Travel………………………..12"
Y Axis Travel ……………………….10"
Z Axis Travel ……………………….12"
Distance from Table Top to Spindle Nose 4.3"- 16.3"
Range of Spindle Speed…80 ~ 8,000 RPM
Spindle Taper……………………….N.S.T. No. 30
Main Motor……………………………5 HP
Number of Tools………………….16 ATC 
Rapid Feed Rate (X,Y /Z)1574.8 IPM / 1417.8 IPM
Cutting Feed Rate (X,Y, Z)……....04 -197 IPM
Tool Change Time ……………….0.9 Sec
Equipped with:
Twin Pallet
Coolant Tank

 Stock NO. O-3344

used MATSUURA RA II

        W/Automatic Pallet Changer

         S/N 880606849     New:  l988

With Yasnac  MX III Control

Specifications:

Travels:

     “Z” Axis                              23.62”

     “X” Axis                              l6.l4”

     “Z” Axis                              18.50”

Pallet size:                               23.6” x l4.9”

Tools:                                     20 ATC

Speed                                     7000 RPM

Taper                                     BT40

Motor                                    10 HP

Machine:

Dimensions                             136”xl24”xll2”

Stock No. O-3715

used MATSUURA MC660V VMC

       with Yasnak Control

       S/N 890807666          New:  l990

General specifications:

Table:                                                    38” x l9”               

Maximum Load                                     880 lbs.

Travel:

         “X”                                                   26”

         “Y”                                                   l8.ll”

         “Z”                                                   l9.09”

 Spindle taper                                           BT40

Spindle rpm                                          60-8000

Spindle motor                                           l0

ATC                                                          20

Tool selection                     Bi-directional rotation

Machine weight                                     7920 lbs.

Equipped with:

Miscellaneous tool holders

Fully enclosed

Available manuals

Stock #O-4823

Mazak Model V10 CNC
Vertical Machining Center
w/M-32 CNC Control
s/n75227    New 1990
Table size    45” x 19.68”
Travels            
40” – X
20” – Y
20” – Z
Spindle speed     4,500 rpm
Spindle taper           CAT 40
Spindle motor            15 HP
Tool change positions  60 ATC
Equipped With:
Mazak M-32 CNC Control
Full enclosures
Coolant system
Telescoping way covers

Stock No. O-1144

MAZAK AJV 25/404 Vertical Machining Center

with 

Serial No. 92885                New:  1991/92

Specifications:

Table size:   l9.68” x 48.8l”

Travels  ‘X’ :  39.37”

              ‘Y’ :  20”

Rapid traverse:  ll80 IPM

Main motor special for I-Bog Spindle:  l0 HP

Spindle taper:  I-Box #35

Spindle speed:  40,000 RPM

No. of tools:  40

Machine weight:  l8,300 lbs.

Equipped with

(2) Pallet shuttle system

I-Bag spindle (2 extra in box)

3-D Graphics Option

(50) I-Bag Tool Holders

Optional 40 Tool ATC

Barnes Chip conveyor

Tool presetter

2-second tool change

All manuals

Stock # O-4037
Mitsui Seiki VS-3A
CNC Vertical Machining Center
  Fanuc 15M CNC Control
  8,000 Hrs. Cycle Time
  S/N: 578           New: 1993
 

Specifications:

27.5" x 17" x 17" Travels
10 HP Main Motor
60 ATC
32,000 RPM Spindle
BT-30 Spindle Taper
Coolant Thru Spindle
Wired for 4th Axis

 Stock No. O-3015

used MORI SEIKI MV 35/40

         Vertical Machining Center

          Fanuc 11M Control

          S/N 414         New:  l985

Specifications:

Table size:                 43” x l3”

Travels:                      “X” - 30”

                                  “Y” -  l3.7”

                                  “Z” -  17.71”

Distance between spindle and colum front 5.9”-23.62”

Rapid:                        394 IPM

Spindle:                     7.5 HP

Max Table Load        1,100 LBS

Spindle Speeds:        6,000 RPM

Equipped With:

Geared Head

Chip Conveyor

Splash Guards

Coolant

BT40 Taper

Tape reader Bow ways

ATC-20 Tools

Fanuc 11M Control

Fourth Axis Ready

Work Lights

Weight:  l5,000 Lbs. (Approx.)

Stock No. O-4377

MORI SEIKI MV 35/40

Vertical Machining Center

Yasnac MX 1 Control

S/N 46065-1         New:  l986

Specifications:

Table size:                      43” x l3”

Travels:               “X”             - 30” 

                            “Y”        -  l3.7”  

                            “Z”       -  17.71”

Dist. between spindle and column front       5.9”-23.62”

Rapid:                                  394 IPM

Spindle:                               7.5 HP

Taper                                  BT40

Max Table Load                   1,100 LBS

Spindle Speeds:                  8,000 RPM

ATC-20 Tools

Weight:              l5,000 Lbs. (Approx.)

Equipped With:

Chip Conveyor

Splash Guards

Coolant Tank

Tape reader

Boxed ways

Fourth Axis Ready

Work Lights

Some Manuals

MORI SEIKI SV500/50
VERTICAL MACHINING CENTER
w/MSC-501 CNC Control

S/N: 1523   New: 1998

SPECIFICATIONS
X AXIS TRAVEL                                        31.5"
Y AXIS TRAVEL                                        20.1"
Z AXIS TRAVEL                                        20.1"
DISTANCE SPINDLE TO TABLE TOP   5.9  TO 26"
TABLE SIZE                                 43.3" X 23.6"
TABLE LOAD CAPACITY                     2,200 LBS
SPINDLE SPEEDS TO                      10,000 RPM
SPINDLE NOSE                                  50 TAPER
RAPID TRAVERSE RATE                      1259 IPM
FEED RATE
           Z AXIS                                    196 IPM 
           X & Y                                      629 IPM
ATC NUMBER OF TOOLS                              30
MAX. TOOL WEIGHT                              17 LBS
TOOL CHANGE TIME                         1 SECOND
CHIP TO CHIP                              3.1 SECONDS
MAIN SPINDLE DRIVE MOTOR             30/24 HP
POWER SUPPLY REQUIRED                  47.1 KVA
COOLANT TANK CAPACITY              73 GALLONS
MACHINE DIMENSIONS   93"W X 102"L X 112" H
APPROX. WEIGHT                            15,000 LBS 
Equipped With:
HIGH PRESSURE
COOLANT THROUGH THE TOOL
COOLANT TANK
CHILLER

Stock No. O-3522

used MSC CNC Vertical Mill

        with Fanuc OM Control

Specifications:

Table Size:”                 12” x 46”

Table Travel           (X):         36”

Saddle Travel        (Y):         12”

Quill Travel Servo Axis:         5”

Knee Travel (Z):                  16”

Throat Distance:                  18”

Max. Weight Of Workpiece:  300 LBS

Quill Diameter:                       5”

Spindle Speeds   (2): 70-7200 RPM

Spindle Motor:                    5 HP

Weight:                       4500 LBS

*       Equipped With

*       3 Axis CNC CONTROL

*       Coolant System

*       RS-232 Port

*       8 Cat 40 Tool Holders

*       Auto Lub Systems

*       Scales

Stock # O-4561

OKK  MCV-500

CNC VERTICAL MACHINING CENTER

w/Mitsubishi 5000C II control

S/N: 571      NEW: 1981

 SPECIFICATIONS:

 TABLE SIZE.......: 51.25" X 21.75"

CROSS TRAVEL (X).....: 40"

VERTICAL TRAVEL (Y).....: 20"

LONGITUDINAL TRAVEL (Z)......: 22"

SPINDLE SPEEDS.........: 35 TO 3200 RPM

SPINDLE DRIVE......: 15 HP

SPINDLE TAPER.....: CAT 50

ATC …………………20

Equipped with Hydraulic Unit

Stock #O-4822

OKK Model PCV-40 CNC
Vertical Machining Center
w/Mitsubishi Meldas CNC Control
s/n: 859      New: 1985

Table size  28.375” x 16.125”
Travels                                   
 “X”           22”
 “Y”           16”
 “Z”           16”
Spindle speed     10,000 rpm
Spindle taper             CAT 40
Spindle motor             10 HP
Tool change positions  18 ATC
Rapid traverse rate     630 ipm
Cutting feed rate  .1 – 175 ipm
Max table load             660 lbs.
Mitsubishi MELDAS control w/pendant
Full enclosures
Coolant system

Stock # O-4590   

Okuma MC-60VA VMC
w/OSP-5020 CNC Control
S/N:   New: 1993


Specifications:
Table Size                                   24.8" x 60.24"
Maximum Table Load                           3300 lbs
Travels:  X-Axis Travel                        49.21"
         Y-Axis Travel                               24.8"
         Z-Axis Travel                              24.02"
Spindle Nose to Table Top           9.05" - 33.07"
Spindle Speeds                          10 - 5000 RPM
Spindle Taper                                   50 Taper
Main Motor                                            25/30 HP
Tool Changer:     Tool Changer Positions     20 ATC

 

Stock No. O-3657

used OKUMA MC-4VA Vertical Machining Center

         Serial No. 09221         New:  l991

Specifications

Table size:                                                         39.3” x 20.8”

Table load maximum:                                                ll00 lbs.

Max. spindle end to table top:                           7.87” - 25.59”

 Travels:    ‘X’ Axis:                                                          27”
                  ‘Y’  Axis:                                                      l6.l4”

                  ‘Z’ Axis:                                                      l7.70”

Spindle taper:                                                                  #40

Spindle motor:                                                  50-4000 RPM

Automatic tool changer:                                       20 Stations

Dimensions:

Machine weight:                                                    l2,000 lbs.

Equipped with:

OSP 5020 MG CNC Control

Full Enclosed Doors

Some Tool Holders

All availabe manuals

Stock No. O-4569

used OKUMA Model MC-50VA 4-Axis
CNC Vertical Machining Center
S/N 03090013 New 1991

Specifications
Table Size: 20.08” x 5l.l8”
X Axis travel: 4l.34”
Y Axis travel: 20.08”
Z Axis travel: 22.05”
Spindle nose to table top: 7.87” to 29.92”
Spindle taper: #50
Spindle speed range: 30-4000 RPM

Equipped with
20 Position Automatic Tool Changer
Okuma OSP5020 M CNC Control w/ CRT
Coolant System
20 HP Spindle Motor
4th Axis Ready

Stock No O-4143

1995 Phoenix/Kafo Model VTC-3010
Large Capacity CNC Vertical Milling Machine,
S/N 131057
with Fanuc 15M control

Specifications
Taper 50
Table Size 43” X 115”
X Travel 82.67”
Y Travel 39.37”
Z Travel 44”
25 Degree Swivel Head
2 Speed Geared Head 750-3,200 RPM

Equipped with
Fanuc 15M3-Axis CNC Control
30 HP
Steel Way Covers
Chiller
Power Drawer Bar

Stock # O-4803

Sharnoa SVC-24M VMC

Upgraded w/Sharnoa Tiger 8 CNC Control

s/n: 792052504 New:1992

Table Size                             15.75" x 15.75"
X-Axis Travel                               24"
Y-Axis Travel                           15.75"
Z-Axis Travel                               20"
Spindle Nose to Table Top                  5" - 25"
Spindle Speeds                       60 - 6000 RPM
Spindle Taper                                      BT 40
Spindle Motor                              7.5/5.5-KW
Tool Changer                              18 Positions 

Stock # O-4805

Sharnoa HPM-32 VMC
w/ Tiger 6 CNC Control

s/n: 796033304  New: 1995

Table length………………………38”
Table width ………………………17”
Travels:
X ………………………………………32”
Y ……………………………………..18”
Z ………………………………….….25”
Spindle Motor……………………. .7.5-HP
Spindle Speed ……………….8000 RPM
Spindle Taper…………………..Cat #40
ATC…………………………………………….20
Equipped With:
Coolant Tank

Stock No. O-4145

 SHARNOA SVC-36

 3-Axis CNC Vertical Machining Center

  s/n: 391023602     New:  l995

  With Shamoa Tiger 5 CNC Control

Specifications:

Table size:         l5.75” x l3.5”

Travels:

                          ‘X’  36”

                          ‘Y’  22”

                          ‘Z’  26”

Spindle speeds:  To 6000 RPM

Spindle Taper:    BT 40

Max Feed Rate: 400 IMP

Equipped with

l8-Position Automatic Tool Changer

Bijur Lubrication

Coolant System

Shamoa Tiger 5 CNC Control

STOCK #O-3844

       used SHIZUOKA MIllmaster ST-N

            CNC vertical milling machine,

              s/n: 64147  New: 1984

FANUC 6MB controls,

13"x44" table

Stock # O-4361

Sugino Self-Center V6

CNC Drill & TapCenter

s/n: 904004   New: 1990

Specifications:

Table Size: 19.68 × 11.81"

Table Load Capacity: 660 Lbs

X-Axis Table Travel: 11.81"

Y-Axis Saddle Travel: 9.84"

Z-Axis Spindle Head Travel: 9.84"

Distance from SpindleCenter to Column: 19.09"

Rapid Traverse Rate: 708 IPM(X/Y/Z Axis)

Spindle Taper: BT30

Spindle Speeds: 6,000 RPM

Spindle Drive Motor: 3 HP

Automatic Tool Changer: 6 Positions

Toolchange Time: 1 Sec

Selection Method: Random Select, Closer Direction

Floor Space: 64.72" x 92.51"

Machine Height: 77"

Machine Weight 3520 Lbs

Equipped With:

Sugino CNC Control

Rigid Tapping

6 Position Tool Changer 

Manuals 

Stock no 0-3784

Supermax 7 VMC

s/n 89011445   New: 1990

Specification

Table Size........................: 66.9" x  25.6"

Table Load Capacity........: 4,400 lbs

Table Travels X Axis........: 53.2"

Y Axis.........................…..: 27.5"

Z Axis............................:.. 27.5"

Rapid Traverse Rate XYZ....590/590/572 ipm

Spindle Motor.....................: 15/20 hp AC

Spindle Speeds....................: 4000

Spindle Taper.....................: # 50

Dist. Between Spdl. to Column.....: 37.79"

Automatic Tool Changer (30) Tool

Equipped with the following:

FANUC OM CNC CONTROL

Chip cart

Coolant tank

Stock #O-4106

                            TOYODA FVN50A

       CNC Vertical Machining Center

       w/ Autocon Dynapath Delta Control

                 s/n: NC823#4   New: 1981

                     Retrofitted Mid 90’s

Specifications:

Table Size………………………………. 35" x 20" 

X- Axis Travel……………………….. 50”

Y-Axis Travel ………………………… 22.05”

Z- Axis Travel ………………………. 22.05”

ATC  ………………………………………..20 tool

Max. RPM ………………………………. 3150